Additional required resources, Technical publications and manuals – Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Installation - ForGe Control User Manual
Page 71
Rockwell Automation Publication 7000-IN007E-EN-P - June 2014
71
Pre-Commissioning Responsibilities
Chapter 4
Additional Required
Resources
Prior to scheduling your drive commission, ensure you have the following:
•
Self-powered gate driver board test power cable wire harness
(Part no. 80018-298-51) supplied with SCR rectifier drives only
•
Rockwell Automation electrical and mechanical diagrams for each drive
•
PLC program (if supplied with a PLC)
•
Commissioning data sheets
•
All required manuals (see below for list)
If any of the above information is not available prior to the time of
commissioning, please contact the factory.
Technical Publications and
Manuals
Each drive ships with a service binder containing all technical publications
required to install, use, and troubleshoot the drive line-up. This section describes
how to determine what technical publications are required and how to obtain
them in the event that the service binder is not available when pre-
commissioning, or when you require additional information:
The PowerFlex 7000 “B” Frame Commissioning Manual, Publication
: This is a Rockwell Automation-internal document for
commissioning engineers conducting commissioning procedures. Customers can
request copies of the manual from their local Rockwell Automation Office.
The PowerFlex 7000 Technical Data publication: Use this document for
parameter details and programming during commissioning or troubleshooting.
Refer to
for the latest firmware revision.
The PowerFlex 7000 “B” Frame User Manual, Publicatio
:
Use this document for general information regarding the usage and programming
of the operator interface after installation (before or after commissioning.)
Additional Manuals: The electrical schematics that ship with the drive should list
any additional manual necessary for configuring the drive line-up. The schematic
titled “General Notes” identifies all required Rockwell Automation publications
by publication number.