1 - introduction, Chapter objectives, Catalog numbers – Rockwell Automation 2708-DH5B2L_DH5B4L Attended Workstation User Manual

Page 12: Accessory items, Introduction

Advertising
background image

A–B

1

Chapter

1–1

Introduction

Allen-Bradley workstations are designed to be rugged and very reliable when
installed using the correct voltage and network cabling. An inexpensive
network connector (Catalog No. 2708-NNC) has been designed in order to
simplify the network installation. Although the workstations may be securely
installed without this connector, it is highly recommended that this connector
be used. The time saved and the ease of installation will be significant.

Chapters 2 through 4 describe network installation, host communication, and
the connection of barcode scanners.

Installation of a network includes cabling (both power and network) and
configuration of the workstations. In some instances, it may be necessary to
consult Chapters 5 through 8 for detailed information on the proper ways to
configure the workstations.

The catalog numbers covered by this manual include Attended Workstations
2708-DH5B2L and 2708-DH5B4L.

Accessory items for the 2708-DH5B2L and -DH5B4L workstations are listed
below:

Item

Catalog No.

Description

DH5 Power Supply, U.S.

2708-NP1

Accepts 120V AC input power.

DH5 Power Supply, Europe

2708-NP2

Accepts 240V AC input power.

DH5 Network Connector

2708-NNC

Communications port connector that may be wired for point-to-point or
multidrop applications.

Application Generator Software

2708-NAG

Menu-driven development software package for custom application
programming. Includes Catalog Nos. 2708–NNM and –NBD.

Network Manager Software

2708-NNM

Terminal emulator software utilities package that allows the workstation to
be configured for a variety of network configurations.

Basic Language Development Kit
Software

2708-NBD

Contains a set of source files that can be used to reduce program
development time.

Hand-Held Scanner

2755-G3, -G6

Visible laser diode, moving beam, hand-held scanner for bar codes.

Bar Code Wand

2755-W1

Visible red light source (high density bar codes).

Bar Code Wand

2755-W2

Visible red light source (low density bar codes).

Bar Code Wand

2755-W5

Infrared light source (high density bar codes).

Slot Scanner

2755-B1, -B2

Slot scanner for bar codes.

Chapter Objectives

Catalog Numbers

Accessory Items

Advertising
This manual is related to the following products: