Rockwell Automation 2708-DH5B2L_DH5B4L Attended Workstation - Manual (Page 123)

A–B
B
Appendix
B–1
Menu Trigger Keys
The Menu Trigger Keys are two keys that when pressed simultaneously,
allow the user to access menu items. Normally, all you have to do is press
these two keys to access menu items. However, if an A-B VBASIC program
is running, the workstation will have to be powered-off and then powered
back on while the Menu Trigger Keys are being held down.
Knowledge of the Menu Trigger Keys is customarily kept secret to
circumvent unauthorized access to vital workstation functions. In addition,
when workstations are installed for use, a menu protection mode using a
password should be implemented to avoid unintentional or deliberate menu
access.
The Menu Trigger Keys are the ENTER/RIGHT ARROW key
combination.
Once you are in the workstation Menus, each press of the EXIT key will
allow you to back-out one menu at a time until you are in the workstation
status menu of (if a program is running) the program status menu.