Rockwell Automation 2708-DH5B2L_DH5B4L Attended Workstation - Manual (Page 49)

Chapter 5
Configuration Menus
5–8
Time (hhmmss) Current time – This is one method of setting time in the
workstation. Notice that the time shown is the time the menu was entered.
Date (yymmddw) Current date – This is one method of setting the date and
day of week in the workstation. The date must be entered in year, month, and
date order. The “w” represents the day of the week. (Sunday = 1 through
Saturday = 7).
Menu Password 0-9999 – When this is non-zero, the workstation user will
be required to enter this value before access to the menus is allowed.
Note: For added security, the user will be shown prompts for a 5–digit
password, even though only four digits configured are entered.
Clock Mode 1 - 35 (normally 7) – This is a value which contrtols the format
of the time on status displays. This does not affect the BASIC “Time$”
variable. See Appendix I for the full list of formats, and examples of each.
File Block Size – This value controls the size of the blocks which are
allocated for file usage
①
. Choices are:
256
512
1K
2K
4K
The following is a description of those parameters accessed by pressing
<ENTER> when the 4–Bar Code Menu is on the display.
Code 3 of 9 Enabled/Disabled . . . . . . . . .
The workstation will auto-discriminate between codes that are enabled. In
order for the workstation to even attempt to read a code, it must first be
enabled. By default, only Code 3 of 9 is enabled.
Code 3 of 9 Check Digits Disabled/Enabled
Enables check digit verification of all codes read using Code 3 of 9.
①
See the chapter on RAM files in the A-B VBASIC Program Development Manual.
Menu 3: System Menu
Parameters
Menu 4: Bar Code
Menu Parameters