Rockwell Automation 2708-DH5B2L_DH5B4L Attended Workstation - Manual (Page 31)

A–B
4
Chapter
4–1
Status Displays
The status display provides visible and easily available information
concerning the state of the 2708-DH5B2L or -DH5B4L Attended
Workstation. The workstation reports its operational status through ten
informational displays on the front panel LCD Display. The status displays
are automatically shown when the workstation is powered up unless a
BASIC program is running. Each of the status displays is assigned a number
from 0 to 9. To see status display 1, press the “1” key. When any number is
entered, the workstation will present the status display associated with that
number. The ten displays are:
1. Network Status.
2. Reserved Status.
3. Time Status.
4. System Reset Status.
5. Network Que Status.
6. Workstation Memory Status.
7. Program Load Status.
8. Program Run Status.
9. Application Status.
0. Summary Status.
On the workstation’s 2 x 40 display, two separate status displays will be
shown.
Figure 4.1
Example Status Display
N . . . . . . NN . 01–01 <0 2> NETWORK 2
01234556789 MASTR
Introduction