Rockwell Automation 2708-DH5B2L_DH5B4L Attended Workstation - Manual (Page 35)

Chapter 4
Status Displays
4–5
This display (Figure 4.4) currently has no function. Allen-Bradley has
reserved this menu for future enhancements.
Figure 4.4
Reserved Status, Display 2
NETWORK 2
This display shows the time and date.
Figure 4.5
Time Status, Display 3
2:01:25 PM
MON MAY 8, 1990
To change the format of the time and data, simply choose the option CLOCK
MODE on the system menu (menu 3). Refer to Appendix I for a description
of the CLOCK MODE options.
Serious errors encountered by a workstation are known as “system resets”.
To try and correct a problem the workstation will reset itself and in the
process will attempt to identify the error. The error is then logged, and the
number of system resets is incremented.
Figure 4.6
System Reset Status, Display 4
EC ##
AThhmmssnnyymmdd
The EC in Figure 4.6 represents the Error Code. The ## represents the
number of serious errors. The lower lines gives you “at time and date”.
Reserved Status
(Status Display 2)
Time Status
(Status Display 3)
System Reset Status
(Status Display 4)