Scanner cable to synapse cable connection – Rockwell Automation 2755 2D Hand-Held Scanner User Manual
Page 28
Advertising
![background image](/manuals/580861/28/background.png)
2–4
Connecting the Scanner
Publication 2755-6.4
Scanner Cable to Synapse Cable Connection
To connect the scanner cable to a Synapse cable, push the cable into
the connector until you hear the connector snap in place. To remove
the scanner cable, press down on the small raised bump on the
connector end and remove cable.
Press Here
to Remove
Scanner Cable
Synapse Cable
(2755-HFC-SR3-01 shown)
Scanner
Advertising