Scanner to plc connection – Rockwell Automation 2755 2D Hand-Held Scanner User Manual
Page 37
Advertising
Connecting the Scanner
2–13
Publication 2755-6.4
Scanner to PLC Connection
Use the 25-Pin RS-232 Synapse cable (Catalog No.
2755-HFC-SR2-01) to connect the scanner cable to the Channel 0
port of a PLC-5. The Channel 0 port must be configured for RS-232
communications.
To Channel 0 Port
Power Supply
Scanner Cable
RS-232 Synapse Cable
(2755-HFC-SR2-01)
Scanner
PLC-5
Note: Connect the
power supply last.
Refer to the user manuals for the Allen-Bradley 6200 Series
Programming Software to make sure the Channel 0 settings match
the Synapse cable settings.
Advertising