Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 78)

Communication Setup (Synapse Cable) 5–17
Publication 2755-6.4
Country Selection
Select the country for the keyboard type the Synapse cable is
connected to. The selections are:
•
North American (default)
•
German
•
French
•
French International
•
Spanish
•
Italian
•
Swedish
•
British
Unknown Characters
Unknown characters are characters not recognized by the scanner.
When Send Bar Codes with Unknown Characters is enabled
(default), all decoded bar code data is transmitted except for the
unknown characters. If this option is disabled, bar codes containing
one or more unknown characters are not transmitted.
Intercharacter Delay
Some devices require a delay between characters to simulate the
effect of keystroke delays (characters are sent at a lower rate). The
default is short delay (5 msec). The options are:
•
Short 5 msec delay (default)
•
Medium 50 msec delay
•
Long 99 msec delay