Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 77)

5–16 Communication Setup (Synapse Cable)
Publication 2755-6.4
Setting DEC VT220 / VT320 / VT420 Keyboard Wedge
Synapse Cable Options
This section defines the communication options available when the
scanner is connected to this DEC Keyboard Wedge Synapse cable:
•
Catalog No. 2755-HFC-SV1-01
Default Settings
Scan the Set DEC VT 20/320/420 Wedge Synapse Cable Defaults
bar code to set the Synapse cable to default settings. The table below
lists the defaults.
Parameter Default Setting
Refer to
Description
on Page:
Programming
Guide ➀
Page Reference
Host DEC VT220 / 320 5–16 5-2
Country North American 5–17 5-2
Unknown Characters
Send Bar Codes With
Unknown Characters
5–17 5-4
Intercharacter Delay 5 Millisecond 5–17 5-4
Parameter Set Parameter Set 1 5–18 5-5
➀ Programming Guide for 2-D Bar Code Scanners (Publication 2755-6.7)
Host Selection
Select the type of host the scanner will be communicating with.
The selections are:
•
DEC VT 220/320 (default)
•
DEC VT420