Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 84)

Communication Setup (Synapse Cable) 5–23
Publication 2755-6.4
Advanced Features
The advanced feature options allow you to store communication
parameters for 2 separate applications. If you have already
configured the scanner, all of the communication settings are stored
as Parameter 1 settings (default setting). Using the advanced feature
options, you can also create Parameter 2 settings. When using the
scanner, scan the correct parameter setting bar code for each
application.
To select and/or set Parameter Set 1 configuration:
Configure the scanner communications as described in this chapter.
Since Parameter Set 1 is the default you do not have to scan the
Parameter Set 1 bar code.
To change the Parameter Set 1 configuration after storing settings in
Parameter Set 2, scan the Parameter Set 1 code and then change the
communication parameters as necessary.
To set Parameter Set 2 configuration:
1. Scan the Parameter Set 2 bar code.
2. Configure the scanner communication parameters as described in
this chapter.
To select and/or set defaults for a parameter set, scan the appropriate
default bar code. The selections are:
•
Set Defaults Current Parameter Set
•
Set Defaults Both Parameter Sets