Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 70)

Communication Setup (Synapse Cable) 5–9
Publication 2755-6.4
Setting IBM PC Keyboard Wedge Synapse Cable Options
This section defines the communication options available when the
scanner is connected to one of these IBM AT/XT or PS/2 Keyboard
Wedge Synapse cables:
•
Catalog No. 2755-HFC-SP1-01
•
Catalog No. 2755-HFC-SP2-01
Defaults Settings
Scan the Set PC Wedge Synapse Cable Defaults bar code to set the
synapse cable to default settings. The following table lists the
default settings.
Parameter Default Setting
Refer to
Description
on Page:
Programming
Guide ➀
Page Reference
Host
IBM PC/AT
IBM PS/2-50, 55SX, 60, 70,
80
5–10 3-2
Country North American 5–10 3-3
Bar Codes with
Unknown Labels
Send Bar Codes With
Unknown Characters
5–11 3-4
Intercharacter Delay 5 milliseconds 5–11 3-4
Parameter Set Parameter Set 1 5–12 3-5
➀ Programming Guide for 2-D Bar Code Scanners (Publication 2755-6.7)