Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 58)

Configuring the Scanner 4–11
Publication 2755-6.4
Transmit Code ID Character
When enabled, this option transmits a code ID character or an AIM
ID character to identify the code type of the symbol scanned. This
option is useful if you are scanning more than one code type. If a
prefix is defined, the code ID character is sent after the prefix and
before the decoded symbol. The default is to not transmit a Code ID
character.
Code ID characters are listed below. AIM ID characters are listed in
Appendix D.
Code Type Code Identifier (ID)
UPC-A, UPC-E, EAN-13, EAN-8 A
Code 39 B
Codabar C
Code 128 D
Code 93 E
Interleaved 2 of 5 F
Discrete 2 of 5, D 2 of 5 IATA G
UCC/EAN 128 K
PDF417 X