Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 51)

4–4 Configuring the Scanner
Publication 2755-6.4
Set Defaults
Scan the Set Defaults bar code to return all parameters to the default
values listed in Table 4.A.
Select Symbologies
Scan the bar code labels for the symbologies you want the scanner to
decode. Only enable the symbologies you expect to read. The
scanner automatically discriminates between all of the symbologies
below. The only exception is that the scanner cannot discriminate
between Code 39 and Code 39 Full ASCII.
•
UPC Versions A and E (EAN 8 and 13)
•
Code 39 (Code 39 Full ASCII)
•
Codabar
•
UCC/EAN 128
•
Interleaved 2 of 5
•
Discrete 2 of 5
•
PDF417
By default, all symbologies are enabled except Interleaved 2 of 5 and
Codabar.
To enable a symbology, scan the Enable bar code for the symbology.
To disable a symbology, scan the Disable bar code. You can enable
all code types (only Code 39 Full ASCII is disabled).