Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 64)

Communication Setup (Synapse Cable) 5–3
Publication 2755-6.4
Host Selection
Currently, the only host selection is for standard RS-232
communications. Additional host selections may be added in the
future.
•
Standard RS-232 (default)
Baud Rate
Sets the rate (bits per second) at which the scanner transmits data.
The scanner baud rate setting must match the host setting.
The selections are:
•
110
•
300
•
600
•
1200
•
2400
•
4800
•
9600 (default)
•
19200