Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 29)

Connecting the Scanner 2–5
Publication 2755-6.4
Scanner Emulation Synapse Cable Connections
Use the Scanner Emulation Synapse cable to provide undecoded
output to a scanner input port of a bar code decoder (cable has
female 9-pin DB connector).
Catalog No. 2755-HFC-SA1-01
A separate power supply provides power to the scanner. The power
supply plugs into the Scanner Emulation Synapse cable.
To Bar Code Decoder
Power Supply Scanner Cable
Scanner Emulation Synapse Cable
(2755-HFC-SA1-01)
Scanner
Note: Connect the power
supply last.
!
ATTENTION: Do not install the Scanner Emulation
Synapse cable with power applied to either the Synapse
cable or decoder. Failure to follow this caution may
result in damage to the scanner, Synapse cable, or
decoder.