Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 48)

Chapter
4
Publication 2755-6.4
Configuring the Scanner
This chapter describes the scanner configuration options.
Important Notes on Configuring Scanner
•
Bar codes for configuring the scanner and Synapse cable are
located in the Programming Guide for 2-D Bar Code Scanners
(Publication 2755-6.7).
•
Configure the scanner.
•
Configure the Synapse cable. Separate configuration codes are
scanned to configure the cable.
Chapter 5 describes the communication setup (cable
configuration) codes for the RS-232, keyboard wedge cable,
scanner emulation.
Configuration Bar Codes for Scanner
All configuration bar codes are found in the Programming Guide for
2-D Bar Code Scanners (Publication 2755-6.7). The scanner is
always enabled to read Code 128 configuration bar codes since all
configuration codes use this symbology.