Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 26)

3-2 Control and Configuration Software V6.1
3.2 Creating a New Configuration
You can create a new drive configuration, which sets the parameter values to their
defaults. You assign a name to the configuration file when you save it. See section 3.6
for information about saving configurations.
To create a new configuration:
• From the File menu, choose New, or click .
If a configuration file is already open and has been changed, a dialog box is displayed
that asks if you want to save the current configuration file. If you select Yes, the Save
As dialog box is displayed before the new configuration file is opened.
When you create a new GV3000 or Liqui-Flo configuration, the File New dialog box
(figure 3.2) is displayed. This lets you select the Vector or Volts/Hertz control
(regulation) type and USA, Japan, or Europe as the default type.
After making your selections, select OK to open the new configuration file.
When you select the control type, parameters that depend on the control type are
changed to their defaults. The control type determines which parameters are
displayed. See the appropriate drive instruction manual for more information about the
control and default type options.
Figure 3.2 – File New Window