Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 54)

6-2 Control and Configuration Software V6.1
You can select a parameter shown in the Monitor window by clicking the parameter
name, or by using PgUp, PgDn, and the arrow keys. The Remove and Assign
functions work on the selected parameter. Figure 6.1 shows an example of the
Parameter Monitor window.
The sections that follow describe the functions available when using the CS3000
Parameter Monitor function.
Figure 6.1 – Parameter Monitor Window