Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 31)

Configuring the Drive 3-7
3.5 Editing a Configuration
You can edit the opened configuration using the Configuration Editor. When the editor
is started, the software makes a copy of the opened configuration for you to work on.
This gives you the option of either saving or ignoring the changes when you exit the
Configuration Editor.
To access the Configuration Editor:
• From the Config menu, choose edit, or click .
Figure 3.4 shows a sample Configuration Editor
The parameters shown in the Configuration Editor are the ones that you can modify
and download to the drive or save to a configuration file. Only retentive input
parameters appear in the Edit dialog box.
3.5.1 Assigning Parameter Values
Use the Configuration Editor to change parameter values. You can change values by
doing one of the following:
• Select the parameter you want to change and choose the Assign button.
• Select the parameter you want to change and edit the parameter directly.
• Double-click on the parameter.
Figure 3.4 – Configuration Editor