Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 37)

Uploading and Downloading Drive Configurations 4-1
C
HAPTER
4
Uploading and Downloading Drive
Configurations
This chapter describes how to upload, download, and compare drive configurations.
4.1 Uploading a Drive Configuration
You can upload the drive configuration from the connected drive to the personal
computer.
To upload a configuration:
Step 1. Make sure the personal computer is connected to the drive. Refer to sections
2.3 and 3.1 if you need instructions for connecting the personal computer to a
drive.
Step 2. From the Config menu, choose Upload or click .
Step 3. If a drive configuration is already opened, you are prompted to save that
configuration to a file. The open configuration (if any) is replaced by the
uploaded drive configuration.
After uploading the drive configuration, the open configuration is displayed as
“UNTITLED.”