Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 58)

6-6 Control and Configuration Software V6.1
To send the new parameter value to the drive, choose the Send button. Send does not
exit the parameter Assignment dialog box, so you can continue to make adjustments
to the value of the selected parameter and monitor the effect on the drive.
When you have finished making adjustments to the value of a parameter, select OK to
send the parameter value to the drive and exit the Parameter Assign dialog box.
If you select Cancel, the parameter value that appears in the Parameter Assign dialog
box is ignored and the Parameter Assign dialog box is closed.
6.5 Saving a Monitor List
The Save command creates a file containing the list of parameter numbers you have
displayed in the parameter monitor. When you select Save, the Save Monitor List
dialog box is displayed as shown in figure 6.3.
To save a monitor list file, follow these steps:
Step 1. Select the drive and directory for the monitor list file.
Step 2. Enter a file name. Monitor list file names must be eight alphanumeric
characters or fewer. The file name should include the extension .MON.
Step 3. Save the monitor list by selecting OK, or select Cancel to exit the dialog box
without saving.
Figure 6.3 – Save Monitor List Dialog Box