Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 35)

Configuring the Drive 3-11
3.7 Saving the Open Drive Configuration to Another File
You can write the open drive configuration to a configuration file other than the one
shown in the main window. To do this:
Step 1. From the File menu, choose Save As.
The Save Configuration File dialog box is displayed, as shown in figure 3.7
Step 2. Select the drive and directory where you want to store the configuration.
Selecting Network lets you access any mapped network drive.
Step 3. Specify the file name in the File Name field. Configuration file names must be
eight alphanumeric characters or fewer. The file name should have the
extension .CNF.
Step 4. Select OK to save the file. Select Cancel to close the dialog box without
saving.
Figure 3.7 – Save Configuration Dialog Box