Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 47)

Tuning GV3000 and Liqui-Flo Vector Drives 5-5
5.3 Using Custom Tuning
Custom tuning opens a drive tuning dialog box with more advanced tuning features. It
is intended for applications requiring a high degree of performance.
The custom drive tuning dialog box consists of four areas. You can move from area to
area by clicking the appropriate radio button. The areas are:
• Motor data
• Torque/Flux
• Speed Loop
• Profile
Important: Before beginning this procedure, make sure that the motor is connected
to the drive and, if possible, disconnected from the load.
5.3.1 Setting Motor Data
Motor nameplate data can be viewed or changed. When you select Motor Data, the
Drive Tuning dialog box is displayed with motor data values read from the drive.
Figure 5.3 provides an example of the Motor Data dialog box.
!
ATTENTION: This equipment is at line voltage when AC power is
connected. Disconnect and lockout all ungrounded conductors of the AC
power line before working on the unit. Failure to observe this precaution
could result in severe bodily injury or loss of life.
Figure 5.3 – Example of Setting Motor Data Values