Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 64)

7-4 Control and Configuration Software V6.1
7.2 Monitoring Drive Status
The Drive Status window, shown in figure 7.3, automatically opens when you connect
to a drive.The other functions in the CS3000 software are still accessible while this
window is open. You can move this window, close it, or leave it displayed. If you close
this window while connected to the drive, it can be re-opened by using the Status
command from the Drive menu. If you disconnect from the drive, this window is
closed.
Figure 7.3 – Drive Status Window