Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 29)

Configuring the Drive 3-5
3.4 Opening a Configuration File for a Different Version
of the Same Drive
Configuration files include version information about the drive. When you open a
configuration file, the CS3000 software compares the configuration file’s drive version
to the version of the selected drive. If the versions are different, a message box alerts
you of the difference.
.
To: Do the following: Then:
not open the file Choose No. The software returns to the main window without
opening the file.
to copy the configuration file
to the CS3000 software Choose Yes. A copy of the original configuration file is created.
Then the CS3000 software checks for differences
between the parameters in the copy and the
parameters in the currently selected drive.
If no parameter differences are found, the CS3000
main window is displayed and the opened
configuration is named “UNTITLED.” The original
configuration file is not changed. To save the new
configuration, see section 3.6.
If parameter differences are found, the CS3000
software replaces the parameters in the copied
configuration to match the parameters of the
currently selected drive version. The Configuration
Changes dialog box is displayed, which shows you
what changes were made. This dialog box cannot
be edited.