Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 101)

Publication LOGIX-UM004A-EN-P - March 2007
FuzzyDesigner Projects 101
– Gain Forgetting Factor group box – Specify the gain forgetting
factor of a new or existing PIDC.
• Value – Enter the controller gain forgetting factor value of
the controller. The factor default value is set to 1 for a new
PIDC.
• Gain Forgetting Factor track bar – Specify the gain
forgetting factor setting from slow tracking (minimum) to
exact tracking (maximum).
• Description tab dialog – Specify the description of a new or
existing PID controller.
PID Controller Properties Dialog – Description Tab Dialog
– Controller Description – Enter the description of the PID
controller.
• OK button – Accept the entered properties for the project.