Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 72)

Publication LOGIX-UM004A-EN-P - March 2007
72 FuzzyDesigner Projects
To close all open projects, use the Project\Close All main menu
command.
FuzzyDesigner may display a dialog, prompting you to save your
project before closing it. To save the project’s changes, click Yes. To
close the project without saving the project’s changes, click No. To
return to the project without saving or closing the project, click
Cancel.
Message Box of Closing an Unsaved Project
Designing a Project
The fuzzy system is designed in the project window, which is the
main window for every project opened in FuzzyDesigner. There is a
graphical representation of the designed hierarchical fuzzy system
with applied project components and an additional text comment. A
detailed description of how to work in the project window is available
the section Designing a Fuzzy System.
Printing a Project
You can print the active project using the Print main menu command
in the Project menu. You can also configure your printer from the
Print dialog that appears.
Designing a Fuzzy System Having a graphical representation of a Fuzzy System speeds up the
design, and also makes the internal architecture more transparent and
interpretable. It also serves as natural project documentation. The
graphics consist of three parts - the workspace of the project window,
blocks, and text. These are explained in the following sections.