Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 60)

Publication LOGIX-UM004A-EN-P - March 2007
60 FuzzyDesigner Graphical User Interface
FuzzyDesigner has two main modes, Design mode and Monitoring
mode. FuzzyDesigner defaults to the Design mode, where you can
design the project, set or reset options and use all application tools
without any restriction. Use the Monitoring mode when you need to
change the project parameters only, and leave the project design
unchanged. Options and tools that can enable project design changes
are restricted in the Monitoring mode. The current mode is indicated
in the application Status Bar.
You can minimize, maximize or restore all windows opened in the
FuzzyDesigner work area from the menu commands in the Window
menu.
Main Menu This section lists all menu items in the main menu bar of the
FuzzyDesigner main window.
FuzzyDesigner Main Menu
IMPORTANT
The Monitoring mode can be switched on or off directly from
the Edit|Go to Design mode …/Go to Monitoring mode main
menu item or the tool bar with the same name in the tool tip.
The Monitoring mode is automatically enabled when the
following dialoges are opened:
• Watch
• Simulation Watch
• Project Installation Wizard
• Online Connection Wizard Panel
• Monitoring Stand-Alone Component
After you close all of the open dialoges, FuzzyDesigner
switches to the Design mode.