Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 81)

Publication LOGIX-UM004A-EN-P - March 2007
FuzzyDesigner Projects 81
– Rescale Membership Functions of the Applied Terms – Click
this check box to rescale the membership functions of all
terms of the ILV.
• Terms tab dialog – The ILV properties dialog defines the variable
through the following terms.
Input Linguistic Variable Properties Dialog – Terms Tab Dialog
– Count – Specify number of terms, fuzzy sets, related to the
variable.
– Type – Select either the trapezoid or s-function ILV term type.
When the ILV properties dialog is open for the existing
variable, the term type of the applied variable terms is
displayed. Other is displayed when term types for the
selected variable differ.
– Names – Select default names of terms for the variable. When
the ILV properties dialog is open for the existing variable, any
applied terms are shown.
IMPORTANT
The minimum value must be always lower then the maximum
value. When the dialog for a new ILV is opened the default
range is preset to –1 for minimum and 1 for maximum.
IMPORTANT
When the ILV properties dialog is open for an existing variable,
then the terms count, the type and the names are visible, but
you cannot change them in the properties dialog.