Rockwell Automation RSLogix 5000 Fuzzy Designer User Manual
Page 86
Publication LOGIX-UM004A-EN-P - March 2007
86 FuzzyDesigner Projects
• Range tab dialog – Specify the range of the variable and its
default value.
Output Linguistic Variable Properties Dialog – Range Tab Dialog
– Minimum – Specify the lower limit of the variable.
– Maximum – Specify the upper limit of the variable.
– Default Value – Set up the default value of the variable. The
default value must be within the specified range of the
variable.
– Rescale Membership Functions of the Applied Terms – Click
this check box to rescale the membership functions of all
applied terms of the OLV.
IMPORTANT
The minimum value must be always lower then the maximum
value. When the dialog for a new OLV is open the default range
is preset to –1 for minimum and 1 for maximum. The default
value is set to the middle of this variable range.