Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 123)

Publication LOGIX-UM004A-EN-P - March 2007
FuzzyDesigner Projects 123
– X Axis – Select the Input Port or a disconnected Input
Linguistic Variable as the x-axis of the 2D graph.
– From – Specify the lower limit of the x-axis range.
– To – Specify the upper limit of the x-axis range.
– Y Axis – Select the Output Port, the Output Linguistic Variable
or the Output Takagi-Sugeno Variable as the y-axis of the 2D
graph.
– From – Displays the lower limit of the y-axis range.
– To – Displays the upper limit of the y-axis range.
• Grid Density group box – Specify the grid density of the 2D
graph.
– Density – Displays the selected grid density of the graph.
Select the density by clicking a point on the slider.
• Create button – Generate the 2D graph (see 2D Graph).
• Cancel button – Close the 2D Graph Properties dialog without
creating a graph. You can also click Close, at the top right
corner of the dialog.
2D Graph
The 2D graph can be controlled from the context menu or tool bar
buttons.