Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 113)

Publication LOGIX-UM004A-EN-P - March 2007
FuzzyDesigner Projects 113
Port Order Editor Use the Tools\Set Port Order main menu command to open the Port
Order Editor dialog (see Port Order Editor Dialog), where you can
change the order of the Input and Output Ports of the active project.
Port Order Editor Dialog
• Input Ports table – Select one of the applied Input Ports.
• Output Ports table – Select one of the applied Output Ports.
• Shift Port Up button – Click this button to shift any port up by
one position. Select a port in the Input Ports table or the Output
Ports table.
• Shift Port Down button – Click this button to shift any port
down by one position. Select a port in the Input Ports table or
the Output Ports table.
• OK button – Accept the entered properties for the project.
• Cancel button – Click this button to leave the Port Order Editor
dialog. Any changes made are not applied. You can also click
Close, at the top right corner of the dialog.
Watch Use the Tools\Watch main menu command to open a dialog with all
available component values of the active project (see Watch Dialog).
The following buttons are available:
• Data History – Click this button to set up a history depth (see
Watch Data History Dialog). The history depth is specified by
number of samples, which are archived for user needs.
• History Data – Click this button to select components or choose
one or more variables for archiving (see Watch Data History
Dialog).