Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 98)

Publication LOGIX-UM004A-EN-P - March 2007
98 FuzzyDesigner Projects
• General tab control page – Specify the main properties of a new
or existing PIDC.
PID Controller Properties Dialog – General Tab Dialog
– PID Controller Name – Specify the controller name.
– Input Links group box – Set up all available input links or
values.
• Process Variable – Set up required process variable link.
• Set Point Link – Click the check box and select the set
point link.
• Set Point Value – When the Set Point Link check box is not
checked, enter the set point value in the text box.
• P Gain Link – Click the check box and select the P gain
link.
• P Gain Value – When the P Gain Link check box is not
checked, enter the P gain constant value.
• I Gain Link – Click the check box and select the I gain
link.