Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 97)

Publication LOGIX-UM004A-EN-P - March 2007
FuzzyDesigner Projects 97
• Description tab dialog – Specify the description of a new or
existing RB.
Rule Block Properties Dialog – Description Tab Dialog
– Block Description – Enter the description of the RB.
• Rule Editor button – Click this button to open the Rule Editor
(see section Rule Editor), where you can change the block rule
base, for example, add or delete rules.
• OK button – Accept the entered properties for the project.
• Cancel button – Click this button to close the RB properties
dialog. Any changes made are not applied. You can also click
Close, at the top right corner of the dialog.
PID Controller
Use the Edit\New PID Controller main menu command or the New
PID Controller tool bar button to add a new PID Controller (PIDC) to
the active project. Alternatively, use the New PID Controller project
window context menu command to add a controller.
The PID Controller properties dialog appears and a default name is
assigned to the component. Click the OK button to add the
component to the appropriate project. All PID Controller names must
be unique in the same project.