Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 126)

Publication LOGIX-UM004A-EN-P - March 2007
126 FuzzyDesigner Projects
– X Axis – Link the selected Input Port or a disconnected Input
Linguistic Variable to the x-axis of the 3D mesh plot.
– From – Sets the lower limit of the x-axis range.
– To – Sets the upper limit of the x-axis range.
– Y Axis – Links the selected Input Port or a disconnected Input
Linguistic Variable to the y-axis of the 3D graph.
– From – Sets the lower limit of the y-axis range.
– To – Sets the upper limit of the y-axis range.
– Z Axis – Links the selected Output Port, Output Linguistic
Variable or the Output Takagi-Sugeno Variable to the z-axis
of the 3D graph.
– From – Displays the lower limit of the z-axis range.
– To – Displays the upper limit of the z-axis range.
• Grid Density group box – Specify the grid density of the 3D
graph.
– Density – Displays the selected grid density of the graph.
Select the density by clicking a point on the slider.
• Create button – Create the required 3D graph (see 3D Graph).
• Cancel button – Close the 3D Graph Properties dialog. No graph
will be created. You can also click Close, at the top right corner
of the dialog.