Rockwell Automation RSLogix 5000 Fuzzy Designer User Manual
Page 83
Publication LOGIX-UM004A-EN-P - March 2007
FuzzyDesigner Projects 83
• General tab dialog – Specify all parameters of a new or existing
OP.
Output Port Properties Dialog – General Tab Dialog
– Port Name – Specify the OP name. This name will be used as
the output parameter name when the fuzzy algorithm is
compiled to an Add-On Instruction.
– Input Link – Set up the OP input link. The link can realize the
connection between the OP and the Input Port, Output
Linguistic Variable, Output Takagi-Sugeno Variable or the PID
Controller.
• Description tab dialog – Specify the description of a new or
existing OP.
Output Port Properties Dialog – Description Tab Dialog
– Port Description – Enter the description of the OP. This
description will be used as the output parameter description
when the fuzzy algorithm is compiled to an Add-On
Instruction.
• OK button – Accept the entered properties for the project.