Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 139)

Publication LOGIX-UM004A-EN-P - March 2007
RSLogix 5000 Add-On Instruction 139
• An RSLinx Topic corresponding to the Logix controller is created
(see section Configuring RSLinx OPC Server Topic). If an
RSLogix 5000 project is saved, then a default RSLinx Topic is
created with a default name that corresponds to the Controller
Name.
• The fuzzy project used to generate the fuzzy AOI is open in
FuzzyDesigner.
Follow these steps to establish online communication with a Logix
controller.
1. In FuzzyDesigner, click Tools > Add-On Instruction > On-line
Connection Wizard.
2. Specify the RSLinx OPC server.
– If RSLinx software is installed on the same computer, select
the RSLinx OPC Server option and click Next.