Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 91)

Publication LOGIX-UM004A-EN-P - March 2007
FuzzyDesigner Projects 91
• Range tab dialog – Specify the range of the variable including its
default value.
Output Takagi-Sugeno Variable Properties Dialog – Range Tab Dialog
– Minimum – Specify the lower limit of the variable range.
– Maximum – Specify the upper limit of the variable range.
– Default Value – Specify the default value of the variable. The
default value must be within the variable range.
– Rescale Functions of the Applied Terms – Click this check
box to rescale functions of the all applied terms of the OTSV.
IMPORTANT
The minimum value must be always lower then the maximum
value. When the dialog for a new OTSV is opened the default
range is preset to –1 for minimum and 1 for maximum. The
default value is set up to the middle of this variable range.