Rockwell Automation RSLogix 5000 Fuzzy Designer - Manual (Page 99)

Publication LOGIX-UM004A-EN-P - March 2007
FuzzyDesigner Projects 99
• I Gain Value – When the I Gain Link check box is not
checked, enter the I gain constant value.
• D Gain Link – Click the check box and select the D gain
link.
• D Gain Value – When the D Gain Link check box is not
checked, enter the D gain constant value.
• Bias Link – Click the check box and select the bias link.
• Bias Value – When the Bias Link check box is not
checked, enter the bias constant value.
• Manual Control – Select the manual control link.
• Mode Switch – Select the mode switch link.
• Options tab control page – Specify all remaining options of a
new or already existing PIDC.
PID Controller Properties Dialog – Options Tab Dialog
– Features group box – Set up all features of a new or already
existing PIDC.