Rockwell Automation AADvance Controller Demo Unit User Manual
Page 24
Demo Unit User Manual (AADvance Controller)
2-2
Document: 553850 Issue 1.2: March 2011
Changing the Properties of a Resource
Note: This procedure is only for Release 1.1 versions of the Controller.
If you change any properties of a Resource (see illustration), you have to clean the
project/library before you recompile the project. Do the following:
1) Select the Network tab on the Resources-dialog.
2) Click on each field in turn and delete the current value (using the delete or
backspace key).
3) Enter the following default values (or your own values).
Connect TimeOut = 10000
BindResp Timeout = 1000
MaxAge = 2500
BindingReq Timeout = 10000
Update Timeout = 60000
4) On the Resource - Properties dialog, click OK to save your changes.
5) On the main menu of the AADvance Workbench, select Project → Clean
Project/Library.
6) You can now choose to recompile your project.