Rockwell Automation AADvance Controller Demo Unit - Manual (Page 76)

Demo Unit User Manual (AADvance Controller)
5-10 Document: 553850 Issue 1.2: March 2011
Wire Variables to Digital Input Channels
To wire variables to digital input channels do the following:
1) Select a digital input module on the I/O Bus.

The module status variable <tagname> that you assigned will appear in the
Variable field.
2) Select the channel that you want to wire to a variable.
3) Click the button adjacent to the Channel Variable fields.
4) Choose a data structure from the three options displayed: Simple, Compact,
Full.

The Select Variables dialog box opens.
5) Select a named structure, click OK.
6) Repeat steps 2 to 5 for each channel you want to wire.