Rockwell Automation AADvance Controller Demo Unit - Manual (Page 90)

Demo Unit User Manual (AADvance Controller)
5-24 Document: 553850 Issue 1.2: March 2011
1) Select the Thresholds tab on the module editor.

A set of default values is shown in the threshold fields.
2) To enter your own values select the Use Custom Thresholds box, enter your
own values in the threshold fields, click Apply.
Note: You can enter the values in counts (the default units) or in milliamps. To
specify a value in milliamps, append 'mA' to the value; the AADvance Workbench
will convert it into counts.
3) To restore the default values, Click Default then de-select the Use Custom
Thresholds box, click Apply.