Rockwell Automation AADvance Controller Demo Unit - Manual (Page 38)

Demo Unit User Manual (AADvance Controller)
4-4 Document: 553850 Issue 1.2: March 2011
Configure the Processor Battery Alarm
The 9110 Module Editor includes a configuration setting for the battery alarm.
The battery alarm setting has no effect in the current release. Leave this item set to
Enabled.
Configure the Serial Ports
The AADvance controller provides up to six serial communication ports, two for each
T9110 processor module present. .
The serial port settings define the protocol ('type') and the data characteristics of each
of the serial ports. To configure the serial ports do the following:
1) Select the Serial Ports tab.

The Serial Ports Editor dialog box opens.
2) Select the communication parameters from the drop down lists, click Apply.
3) To restore the default values, click Default then Apply.