Rockwell Automation AADvance Controller Demo Unit - Manual (Page 71)

Document: 553850 Issue 1.2: March 2011 5-5
4) Select the required module, then move the cursor to the right and select the
number of modules you require.
5) Repeat this for all the modules you want to configure.
Clear an I/O Bus Slot
To clear an I/O bus slot do the following:
1) Select the Equipment tab.
2) Right-click to select Clear Slot.

The module will be removed from the slot.

The slot will now display as Empty ready to be re-assigned a module.
Note: The channel variable wiring will automatically be unwired.