Rockwell Automation AADvance Controller Demo Unit - Manual (Page 69)

Document: 553850 Issue 1.2: March 2011 5-3
Example Controller Configuration
This example controller has two 9110 processor modules and supports 8 digital inputs
and 8 digital outputs.
Note: The '9801' and '9851' illustrated are simplex termination assemblies for the I/O
modules and provide the connections for the field elements.
This controller has the following physical layout: the two I/O modules are installed to
the right of the processor base unit, which is IO Bus 1. The 9401 is installed in the
first I/O base unit connector, which is slot 1; the 9451 is installed adjacent to the 9401
in the next connector on the I/O base unit, which is slot 2.
You now have to configure the same arrangement in the project tree, connect
variables to monitor module status information and I/O data. Use the Project Tree
View within the AADvance Workbench to assign the I/O modules to empty slot
numbers on the processor IOB IO Bus 1 or IO Bus 2.