Rockwell Automation FactoryTalk View Site Edition Installation Guide - Manual (Page 42)

F ACTORY T ALK V IEW I NSTALLATION G UIDE
28
• •
•
•
•
4. In the System Properties dialog box, click the Advanced tab.
5. In the Advanced tab, under Performance, click Settings.
6. In the Performance Options dialog box, click the Data Execution Prevention tab.
7. Select the option, Turn on DEP for essential Windows programs and services
only, and then click OK.
For Windows XP or Windows Server 2003
1. Open the Windows Control Panel, and then double-click System.
2. In the Advanced tab, under Performance, click Settings.
3. In the Performance Options dialog box, click the Data Execution Prevention tab.
4. Select the option, Turn on DEP for essential Windows programs and services
only, and then click Apply.
Remove unnecessary DCOM networking protocols
If multiple DCOM protocols are installed and configured on the computer, performance of
communications in a FactoryTalk View SE system can be adversely impacted. To ensure
that DCOM communications function correctly, and do not affect the performance of the
system, remove all protocols other than TCP/IP.
To remove unnecessary DCOM protocols
1. Select Start > Run.
2. In the Run dialog box, type dcomcnfg, and then click OK.
3. In the Component Services tool, expand Component Services, open the Computers
folder, right-click My Computer, and then select Properties.
4. Click the Default Protocols tab. If the DCOM Protocols list shows protocols in
addition to TCP/IP, remove those unnecessary protocols. For example, remove the
protocol Connection-oriented SPX.
FTViewSEInstallENU.book Page 28 Wednesday, July 16, 2014 10:53 AM