Rockwell Automation FactoryTalk View Site Edition Installation Guide - Manual (Page 88)

F ACTORY T ALK V IEW S ITE E DITION I NSTALLATION G UIDE
74
• •
•
•
•
To change the HMI server computer name
1. Open the restored application in FactoryTalk View Studio Enterprise.
2. In the Explorer window, right-click the HMI server’s name, and then click
Properties.
3. In the General tab, in the field, Computer hosting the server, type the name of the
production computer, and then click OK.
You can also click Browse to find and select the production computer.
Set up additional HMI server properties
With the restored application open in FactoryTalk View Studio, in addition to specifying
the names of the production computers that will host the HMI servers, you can set up the
following HMI server properties:
 In the General tab, to determine when the HMI server will load, select a Startup Type.
You can specify that the HMI server will load when the first client attempts to connect
to it (On demand) or when the host computer starts up (Load and run startup
components when operating system initializes). The second option is recommended
FTViewSEInstallENU.book Page 74 Wednesday, July 16, 2014 10:53 AM