Rockwell Automation FactoryTalk View Site Edition Installation Guide - Manual (Page 89)

6 • D EPLOYING NETWORK DISTRIBUTED APPLICATIONS
75
•
•
•
• •
for production HMI servers, and required for an HMI server that is part of a redundant
pair.
 In the Redundancy tab, to set up redundancy for the HMI server, first select the check
box, Provide redundancy using a secondary server; then, specify the name the
computer that will host the secondary server, and select a switchover option.
Before you can specify the secondary server in a redundant pair, you must manually copy the
HMI project files to the secondary server computer. To do this, see "Move the application’s
HMI project files" on page 66.
FTViewSEInstallENU.book Page 75 Wednesday, July 16, 2014 10:53 AM