Rockwell Automation RECOMM-485 RS485 DFI Communications Module - Manual (Page 12)

2-2 RS485 DF1 Communication Module
2.1 Required Equipment
Table 2.1 lists the equipment shipped with the RS485 DF1 module.
When you unpack the module, verify that the package includes all
of these items.
Table 2.2 lists user-supplied equipment also required to install and
configure the module.
Table 2.1 – Equipment Shipped with the RS485 DF1 Module
Item Description
One RS485 DF1 Communication Module
One 2.54 cm (1 in) and one 15.24 cm (6 in) Internal Interface
cable (only one of these cables is needed to connect the module
to the drive)
One six-pin linear RS485 DF1 plug (connected to the RS485 DF1
connector on the module)
One grounding wrist strap
One RS485 DF1 Communication Module User Manual (D2-3415)
Table 2.2 – Required User-Supplied Equipment
Item Description
Small flathead or Phillips screwdriver
RS485 cable (Belden 3106A or equivalent is recommended)
Configuration tool, such as
• SP600 LCD OIM
• VS Utilities
• with Serial Converter Module (M/N RECOMM-232)